*EC - Exisitng customer (with chip)      *NC - New customer (without chip)

Home | Superchargers | Accessories | FAQ's | Tech Info | Price List | Tech Articles | Reman SC | Company | Contact Us | Policies

Copyright © 2011 Kenne Bell, Inc. All Rights Reserved

4.6 GT 2V

During the development stages of our 4.6 2V Mustang GT and Bullitt kits, particular attention was given to the inlet tract components as the Twin Screw doesn't like inlet restrictions. A variety of filters, cool air kits, mass air meters, throttle bodies and inlet ducting were tested before finalizing on a combination. Sensors were placed before and after each inlet component to measure air flow and losses throughout the 245-507HP range. These tests determined at what HP level the components became a restriction. Who else but Kenne Bell performs such intensive and informative testing? See "4.6 GT Dyno Test Summary." We highly recommend that our kit customers do not 'mix and match" various components and manufacturers, including chips. Don't be fooled by those that lack the latest sophisticated calibration software used by Kenne Bell. Stick with the dyno tested and proven Kenne Bell products and eliminate the trial and error process, wasted money, troubleshooting and expensive time consuming phone calls.

All inlet kits come with a Kenne Bell Cool Air Kit equipped with a 12" filter. It's the ultimate 4.6 inlet system. Up to 44HP gain (see 4.6 Tech, Tuning & Dyno tests).
This should be the FIRST inlet system upgrade as it's the biggest restriction. Next add the 75mm throttle body. We like the accuracy and air flow of the Ford factory 90mm meter and modify it to fit our kits. Note: NEVER install a meter and larger injectors on our kits without re-calibrating the EEC itself. Kenne Bell 90mm meter sold ONLY with Kenne Bell Chips.

F3004EC* . . 90MM METER / "BIG TUBE" KIT / SWITCH CHIP® UPGRADE / COLD AIR KIT / 75MM THROTTLE BODY
F3003NC* . . 90MM METER / "BIG TUBE" KIT / SWITCH CHIP® / COLD AIR KIT / 70MM THROTTLE BODY
F3003EC* . . 90MM METER / "BIG TUBE" KIT / SWITCH CHIP® UPGRADE / COLD AIR KIT / 70MM THROTTLE BODY
F3004NC* . . 90MM METER / "BIG TUBE" KIT / SWITCH CHIP® / COLD AIR KIT / 75MM THROTTLE BODY

F3002EC* . . 90MM METER / "BIG TUBE" KIT / SWITCH CHIP® UPGRADE / COLD AIR KIT
F3002NC* . . 90MM METER / "BIG TUBE" KIT / SWITCH CHIP® / COLD AIR KIT


*EC - Exisitng customer (with chip)      *NC - New customer (without chip)

Note: 75mm "Big Tube" Kit not sold separately. Available only with 90mm Kenne Bell Meter.